Some folks just need a footswitch that only needs to do one thing. We understand! If you're looking to build your own footswitch for your amp, follow the RJ-45 pin assignments below:
NOTE: color code below is for EIA.TIA 568-A cables. Brown is always ground. Touch the other colors to brown to confirm the desired trigger function.
For Mach 3 and OverDrive 202:
1. Boost – White/Green
2. Limiter - Green
3. Tremolo – White/Orange
4. Reverb - Blue
5. FX Loop – White/Blue
6. Ch 1-2 - Orange
7. Reserved – White/Brown
8. Ground – Brown.
For MicroPro 200:
1. Orange/White - Boost
2. Orange - Limiter
3. Green/White - Tremolo
4. Blue - Reverb
5. Blue/White - FX Loop
6. Green - Mode (*requires 1k resistor from Pin 6 to ground. Only necessary on Gen 1 MicroPro.)
7. Brown/White - NOT USED
8. Brown - Common Ground